Cisco Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0 認定 642-732 試験問題:

1. Which option describes the method of measuring the beamwidth of an antenna?

A) 60 degrees on each side from the main lobe gain
B) - 6 dB on each side from the main lobe gain
C) - 3 dB on each side from the main lobe gain
D) 30 degrees on each side from the main lobe gain

2. Refer to the exhibit.

In testing the post-deployment WLAN network you have discovered an AP that has been placed in a difficult area. The AP cannot be easily moved because of various requirements. The client performance of various Apple and Microsoft operating system-based products does not meet expectations. Which two options can help mitigate the performance issue? (Choose two.)

A) Change the AP location to one that is less RF hostile.
B) Increase the AP power level to maximum.
C) Rotate the AP 90 degrees to change antenna polarity.
D) Add additional APs.
E) Replace the AP with an AP and external antenna.

3. Which tool can best provide throughput verification?

A) WaveDeploy
B) Xirrus Wi-Fi Inspector
C) InSSIDer
D) WLC > Monitor > Clients > LinkTest

4. Refer to the exhibit.

A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. Which option is the maximum allowed power setting for all four bridges?

A) B1=12dBmB2=24dBmB3=24dBmB4=24dBm
B) B1=12dBmB2=12dBmB3=12dBmB4=12dBm
C) B1=10dBmB2=24dBmB3=24dBmB4=24dBm
D) B1=24dBmB2=12dBmB3=12dBmB4=12dBm
E) B1=20dBmB2=20dBmB3=20dBmB4=20dBm
F) B1=24dBmB2=24dBmB3=24dBmB4=24dBm

5. Refer to the exhibit. Which type of interference would the engineer detect on the Cisco Spectrum Expert?

A) microwave
B) analog camera
C) Wi-Max
D) DECT phone
E) Bluetooth

質問と回答：