Motorola Solutions Design WLan Solutions 認定 MSC-121 試験問題:

1. You have been working on the design specification for a new WiNG 5 WLAN for a new customer. The client needs wireless internet connectivity as well as voice over IP (VoIP) in two key auditoriums of their sports center. Your team has just created a LANPlanner report and the design calls for 11 APs. The customer had identified 2 client locations (Location A and Location B) that he would like to discuss with you.
Assume that the VoIP applications you will be deploying are constrained by the parameters outlined in the table below.

Given the constraints of the VoIP applications, which of the following is TRUE at 2,4GHz? Use the relevant VoIP Handsets Application map in the LANPlanner - Sports Center exhibit at the bottom.
Given the constraints of the VoIP applications, which of the following is TRUE at 2.4GHz? Use the relevant VoIP Handsets Application map in the LANPlanner - Sports Center exhibit at the bottom.

A) Clients at both the locations are not served.
B) Clients at both the locations are served.
C) Clients at Location B are served but not at Location A.
D) Clients at Location A are served but not at Location B.

2. Which of the following would NOT be a consideration when planning the design of an outdoor WLAN?

A) Trees in the link path
B) RF line of sight
C) Local public radio stations
D) Link distance

3. You are designing a system for a new client and need to submit the design specification in 10 days. Your project manager has asked you to go to the customer location and record
the actual RF signal properties. Which of the following software packages should you use to collect his information?

A) SiteScanner
B) MSP (Mobility Services Platform)
C) ADSP Spectrum Analysis module
D) RFMS

4. You are drafting all of the final design documentation and the customer wishes to make a change at the last minute. He would like to add a wireless bridge connection between two of their buildings on a campus. The buildings are about 300 yards (275 meters) apart with clear line of site between them. Given this information and that the customer is interested in a cost effective solutions, what antenna type would best fit this application?

A) High gain Omni directional
B) Dipole
C) Parabolic dish
D) Yagi

5. Your customer has a requirement that all APs used in the design have dual radios, 2.4 GHz and 5.8 GHz. Which of the following APs cannot meet this requirement?

A) AP7131
B) AP6532
C) AP650
D) AP6511

質問と回答：