Avaya Communication Server 1000 for Avaya Aura Implementation 認定 7003-1 試験問題:

1. A customer requires an upgrade from release Communication Server 1000E Rls. 7x. the current system has a release 5.0 CPPM Call Server and an ISP 1100 Signaling Server. They have 874 IP telephone users and 810 TDM telephone deployed.
Which upgrade will support the customer's current deployment scenario?

A) Replace the CPPM and ISP 1100 with a COTS 2 server deployed as a Co-Resident Call Server and Signaling Server.
B) Upgrading the CPPM Call Server software to release 7.0 and deploy it as a Co-resident Call Server and Signaling Server Decommission the ISP 1100 Signaling Server.
C) Replace the CPPM and ISP 1100 with a CPDC server deployed as a Co-Resident Call Server, Signaling Server.
D) Upgrade the bios and the call Server software. Replace the ISP 1100 with a CPDC server deployed as a Signaling Server.

2. Your customer has requested you add the Call Park Feature to their Communication Server 1000 Release 7x system. You have been asked to assign at least eight consecutive numbers that can be used to park calls.
Which CLI overlay and command will provide you with numbers that are unassigned and available?

A) LD 20 / REQ / LUDN
B) LD 20 / REQ / LUVU
C) LD 20 / REQ / LUC
D) LD 20 / REQ / LUU

3. A customer has deployed a Communications Server 1000Rls. 7x system at their site. Their sales department is expanding and has asked that five new telephones be added with the same capabilities as the existing telephones in the department.
Which programming command should be used to complete this task?

A) Move to DN
B) Copy from DN
C) Copy from TN
D) Move from DN

4. Click the exhibit button.

A technician is provisioning a new Communication Server (CS) 1000 Rls. 7x system for a customer, and is adding an SIP virtual route using Element Manager Routes and Trunnks.
What is the Trunk Type (TKTP)?

A) Automatic (TIE AUTO)
B) TIE Trunk data block (TIE)
C) Integrated Service Access route (ISA)
D) Direct inward Dialing trunk (DID)

5. Click the exhibit button During the installation the installation of a Communication Server 1000E Rls. 7x High Availability system for a customer, attempts to register an IP 1230 Desktop telephone with the system are unsuccessful. Network connectivity issues have already been ruled out, however a system configuration issue is suspected.

Avaya 7003-1 Exam
What is causing the problem?

A) The Line Terminal Proxy Server is not enabled for the node
B) The proper firmware has not been uploaded for this telephone.
C) The virtual gateway application is not enabled.
D) The Datagram Transport Layer Security (DTLS) Policy off.

質問と回答：